Your list is empty, add products to the list to send a request
Close
Ravel Multi Sensor Detector
Ravel Multi-Sensor Detector UL Listed Analogue addressable Multi Sensor detectors with smoke detectors and the combination of heat detectors with a fixed temperature of 59 degrees Centigrade and a Rate of raise facility of 11.1.Deg C /min with 8-digit dip switches for ( 1 to 254) address settings.
Close
Ravel Conventional Smoke Detector
Ravel Conventional Smoke Detector fire alarm Provide high quality, reliability, and the ultimate in design and decor. The low silhouette and pure white finish blends with most ceiling styles to provide an inconspicuous unit.
Close
Mcp-red Ravel Make
Mcp-red Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
RE-316S 2L conventional Smoke Detector With Base-make Ravel
Optical Smoke Detector With Base-make Ravel An optical smoke alarm works using the light scatter principle. The alarm contains a pulsed infrared LED which pulses a beam of light into the sensor chamber every 10 seconds to check for smoke particles
Close
Ravel ABS Conventional Sounder cum Strobe Model: RE-25SS
Ravel ABS Sounder Cum Strobe Signal & Electric Horn Combo, Red, 24VDCT for general purpose can be used in harsh environments Audible and visual alarm signal effect in one unit. LED Strobe Signal Beacon & Electronic Sounder Combinations Weatherproof LED Strobe Beacon Sounder / Audible & Visual Alarm.
Close
Ravel RE-9016 Conventional Fire Alarm Panel System 16 Zones
Complies with UL -864 and NFPA-72. 20 x 4 Dot Matrix LCD Display. Operates on 120 220v 60 /50 Hz, AC Mains power supply. Standby (battery) backup 24v DC power supply with builtin charger. Touch Keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Class B Notification Appliance Circuits (NAC). NAC shall be programmed as auto silence / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24V D.C. Output. S 485 Communication facility. TCP/IP facility (Optional) MODBUS for BMS integration (Optional). PC software (optional) External Zone Wise Sounder/Contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Facility to connect Public Address System (PA) through RS-485 Communication. Peer to Peer network facility. Maximum 16 panels can be connect in a Single Network. Electrical Specification
Close
Ravel 4 Zone Fire Alarm Panel
Ravel 4 Zone Fire Alarm Panel microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted.
Ravel 2 Zone Fire Alarm Panel
Ravel 2 Zone Fire Alarm Panel microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted.
Close
Ravel RE 316H-2L Conventional Fire Alarm Heat Detector
Ravel RE 316H-2L Conventional Fire Alarm Heat Detector is designed to work with all conventional Panels. These detectors are low
Close
Ravel RE-9064 Conventional Fire Alarm Panel System 64 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network. 20 X 4 Dot Matrix LCD display. Alphanumeric keypads. RS 485 Communication for Network Repeater. System ON, AC ON, Battery ON, Charger ON indications. Lamp test facility. Maximum 16 panels including repeater can be connected in a Single Network.
Close
Ravel RE-9048 Conventional Fire Alarm Panel System 48 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network. 20 X 4 Dot Matrix LCD display. Alphanumeric keypads. RS 485 Communication for Network Repeater. System ON, AC ON, Battery ON, Charger ON indications. Lamp test facility. Maximum 16 panels including repeater can be connected in a Single Network.
Close
Ravel RE-9032 Conventional Fire Alarm Panel System 32 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network. 20 X 4 Dot Matrix LCD display. Alphanumeric keypads. RS 485 Communication for Network Repeater. System ON, AC ON, Battery ON, Charger ON indications. Lamp test facility. Maximum 16 panels including repeater can be connected in a Single Network via RS-485. Repeater Panel can monitor the status of RE-900 series panels via RS-485 Network communication. User can Disable / Enable the Zone of Fire Alarm Control Panel Connected in network. Ravel Indian Manufacturer, International standard. Operates on RS-485 communication. Repeats all the parameters of the main FACP.
Close
Ravel RE-9024 Conventional Fire Alarm Panel System 24 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network.
Close
Ravel RE-9020 Conventional Fire Alarm Panel System 20 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single
Close
Ravel RE-9012 Conventional Fire Alarm Panel System 12 Zones
The microprocessor based CE mark 12 Zone conventional fire alarm control panel, the system has 20 X 4 LCDcharacter with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contacts & 2 common NAC sounder output, inbuilt Rs-485 for Networking TCP/IP, peer to peer & repeater connectivity, central monitoring facility, inbuilt RTC with Event logs, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
Close
Ravel RE-2558 Conventional Fire Alarm Panel System 8 Zones
Switched Mode Power Supply. Modular Construction Auto Resettable Fuse Surge Protection for all Input and outputs. Programmable AC loss delay/Trouble Remainder/Alarm Verification Battery polarity reversible protection Surface Mount Technology Over All current consumption is low. Fully complies with UL -864 and NFPA-72. Rugged CRCA sheet with powder coated finish Operates on 110 220v 50 /60 Hz, AC Mains power supply. 16×2 Dot Matrix LCD Display. 4/8 Class B Style B or Style C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Any Zone can be configured as Alarm or supervisory Zone. 2ClassBNotificationApplianceCircuits(NAC). NAC shall be programmed as silenceable or Non Silenceable. Supervisory Zone shall be Latching or Resettable. Standby (battery) backup 24v DC power supply with built in charger Error free Fire / Fault status in unambiguous colored LED indication. System ON indication. Main, Standby status audible and visual indication. Battery Low visual warning with audible tone. FormC relays for fire, fault and supervisory. Resettable / Steady 24V D.C. Output. RS 485 Communication facility (Optional). Lamp Test facility. All field wiring circuits are Power limited except 110 220v AC and Battery. All field wiring circuits are supervised. Walk Test facility. Zone Isolation facility with loop voltage cut off. Earth fault annunciation facility at 0 ohms. AC Low voltage cutoff. Programmable AC loss delay / Alarm verification / Trouble reminder.
Close
Mcp Abs Green Colour Re 716my ravel
Mcp Abs Green Colour Re 716my ravel The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature. We offer stringent quality check of our items on different parameters before conveyance to guarantee their ideal execution.
Close
Mcp Abs Yellow Colour Re 716my Ravel
Mcp Abs Yellow Colour Re 716my ravel The gave item is very recognized by benefactors attributable to elements like dimensional precision, toughness, erosion, and scraped area safe nature. We offer stringent quality check of our items on different parameters before conveyance to guarantee their ideal execution.
Close
Mcp-green Ravel Make
Mcp-green Ravel Make Manual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
Close
Mcp-yellow Ravel Make
Mcp-yellow Ravel MakeManual call point is a trigger mechanism which helps in identifying the building or an area where fire has occurred in order to Detect the attention of personals to that area. Fire Alarm manually in case of any emergency or if fire/smoke is visible
