Your list is empty, add products to the list to send a request
Close
GSTI-9403 Intelligent Sounder Strobe
Providing 16 tones. Using ultra bright LEDs as source for light indication. Optional transparent colorless lens (C-94WL) available. Loop powered or external 24V powered. Power-saving consumption mode and normal consumption mode (factory default). Single/dual address programmable. Working modes: sounder & strobe/strobe only/sounder only. Standard: EN 54-3.
Close
GSTDI-M9204 Digital Manual Call Point
Electronically addressed. The address can be modified in field. Alarm by pressing, reset by a special key. Plug-in structure. Standard: UL38.
Close
GSTDC-M9503 Loop Isolator Module
Isolation of short circuit, automatic restore when short circuit is cleared. Support Class A SLC loop Standard: UL864 NFPA [70.72]
Close
GSTDI-9301E Digital Single Input and Output Module
The dry contact input port can be programmed to NC or NO and monitored. The input can also be programmed as self-answering, which means that the Input port monitoring is disabled, and the module will directly send a status signal to FACP when the dry-contact output changes state. Addressable unit. Address can be programmed in field. Input port utilizes AD sampling technology for precise testing. DIN-Rail mounted or Wall mounted. Standard: EN 54-18:2005
Close
GSTDI-9300E Digital Single Input Module
Normally closed input, normally open input can
be set through a hand held programmer. Electronically addressing. Addresses can be
modified in field. Built-in microprocessor processes messages
intelligently.. Input terminals apply AD sampling with precise
testing. DIN-Rail mounted or Wall mounted. Standard: EN 54-18:2005
Close
GSTDB-01 Addressable Common Detector Base
A common base for both GST addressable and conventional DI/DC series detector, provides mechanical fixing and electrical connection.
There is no electrical component on the base.
The DB-01 base has 4 terminals marked with 1-4. For the detail connections, please refer to the manual of installed detector
Close
GSTDI-9101E Addressable Intelligent Combined Heat Photoelectric Smoke Detector
Electrically addressed, can be modified by programmer Strong environmental adaptability due to drift
compensation Self-diagnostic Reed switch test Dirty chamber checking Fire LED allows 360° viewing Possible to switch off polling LED Remote indicator output 2 levels smoke sensitivities, level 1 complies with
EN 54-7 LPCB approved at EN 54-7 and EN 54-5
Close
GSTNRP-00 Addressable Fire Alarm Repeater Panel
In order to cater the variegated demands of our clients, we are offering an excellent quality range of Fire Alarm Repeater Panel.
Close
GST200N-2 Addressable Intelligent Fire Alarm Control Panel 2 Loop
Non-Volatile memory ensures the data does not loss even if power supply is accidentally removed Sounder strobe output provides 0.5A/24V load, compatible with GST conventional sounders Max. 30 zones. Each zone has its own alarm and fault/disable indicator and a label Compatible with GST intelligent and digital products RS232 interface enables communication with PC Optioanl expaned to 2 loops, 477 loop devices RS485 or CAN interface enables networking 15 LEDs to display important information Capacity 236 addressable devices 8X18 characters LCD screen
