Your list is empty, add products to the list to send a request
Close
Edward EC-100R Beam Detector With Reflector (HSN 85319000)
Edward EC-50R + SIGA-CT1 Analogue Addressable Beam Detector With Reflector comprises a transmitter and receiver in a single enclosure as well as is usually installed between 19 inches and 24 inches below the ceiling. The transmitter emits an invisible infrare light beam that is reflect via a prism mount directly opposite and with a clear line of sight.
Close
Edward SIGA-CT1 Addressable Monitor Module
Edwards EST SIGA-CT1 Single Input ModuleThe Edwards / EST SIGA-CT1 Single Input Module is an intelligent analog addressable device used to connect one Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuits (IDC). The Signature Series modules are compatible only with ESTs Signature Loop Controller. CT1 is an analog addressable device used to connect a Class B normally-open Alarm, Supervisory, or Monitor type dry contact Initiating Device Circuit (IDC) to a Signature Loop Controller. One (1) Device is required. Models SIGA-CT1 Features - MULTIPLE APPLICATIONS Including Alarm, Alarm with delayed latching (retard) for waterflow applications, Supervisory, and Monitor.
Close
Edward SIGA-OSD + SIGA-AB4G Addressable Smoke Detector with Sounder Base
Edward SIGA-OSD +
SIGA-AB4G Addressable Smoke Detector with Sounder Base brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
Close
Edward SIM-INTL 3.0 Zone Address Module To Connect Conventional Zones With The Addressable Panel
Edward SIM-INTL 3.0 Zone Address Module To Connect Conventional Zones With The Addressable Panel For Third Part Equipments Control Relay ModuleThe Edwards / EST SIGA-CR Control Relay Module provides a Form C dry relay contact to control external appliances such as door closers, fans, dampers etc.
Close
Edward SIGA-CR Addressable Control Module For Third Part Equipments
Edward SIGA-CR Addressable Control Module For Third Part Equipments Control Relay ModuleThe Edwards / EST SIGA-CR Control Relay Module provides a Form C dry relay contact to control external appliances such as door closers, fans, dampers etc.
Close
Edward SIGA-CC1 Addressable Control Interface Module for Hooter/Strobe or Hooter
Edward SIGA-CC1 Addressable Control Interface Module for Hooter/Strobe or Hooter Upon command from the loop controller, the module connects supervised Class B signal or telephone circuits to the respective riser input. The riser input can be 24 VDC (to operate polarized audible and visible signal notification appliances), 25 or 70 VRMS (to operate audio evacuation speakers), or firefighter telephones.
Close
Edward SIGA-IM2 Fault Isolator Module For Isolating Shorted
Edward SIGA-IM2 Fault Isolator Module For Isolating Shorted Once activated, the line fault isolator continuously checks the faulted side of the loop to determine if the short still exists. Also, when the fault is removed, is automatically restores the entire data loop to a normal condition. The microprocessor in every module gives at least three important benefits Self-diagnostics and History Log, Mapping, and Fast, Stable Communication.
Close
Edward SIGA-270 Addressable single action type Manual Call Point
Edward SIGA-270 Addressable single action type Manual Call Point intelligent manual pull stations are engineered to deliver high-performance features, superb reliability, and unbeatable quality. From control of ancillary equipment, to enhanced signaling functionality, these products add flexibility and powerful options to Kidde intelligent systems.
Close
Edward SIGA-278 Addressable Dual Action Type Manual Call Point
Edward SIGA-278 Addressable Dual Action Type Manual Call Point intelligent manual pull stations are engineered to deliver high-performance features, superb reliability, and unbeatable quality. From control of ancillary equipment, to enhanced signaling functionality, these products add flexibility and powerful options to Kidde intelligent systems.
Close
Edward G1ARF Conventional Electronic Sounder Only
Edward G1ARF Conventional Electronic Sounder Only Series horns and LED strobes feature a sleeklow profile design and energy-efficient technology that makesthem less expensive to install and operate by reducing overhead.High performance LEDs require fewer circuits and power supplies.These new appliances are designed with energy-efficiency and lifesafety in mind.Genesis LED G1 Series uses high efficiency optics, combinedwith patented electronics, to deliver a highly controlled andefficiently focused light distribution pattern in exchange for lowercurrent requirements.
Close
Edward G1AVRF Conventional Electronic Sounder With Strobe
Edward G1AVRF Conventional Electronic Sounder With Strobe Series horns and LED strobes feature a sleeklow profile design and energy-efficient technology that makesthem less expensive to install and operate by reducing overhead.High performance LEDs require fewer circuits and power supplies.These new appliances are designed with energy-efficiency and lifesafety in mind.Genesis LED G1 Series uses high efficiency optics, combinedwith patented electronics, to deliver a highly controlled andefficiently focused light distribution pattern in exchange for lowercurrent requirements.
Close
Edward SIGA-COD+SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base
Edward SIGA-COD + SIGA-SB Addressable Carbon Monoxide Detector With Mounting Base detector brings advanced sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety capabilities. Continuous self-diagnostics ensures reliability over the long-haul, while advanced electrochemical CO sensing technology provides performance benefits that keep occupants safe from carbon monoxide, the silent killer.
Close
Edward SIGA-HRD + SIGA-SB Addressable Heat Detector with Base
Edward SIGA-HRD + SIGA-SB Addressable Heat Detector with Base is anÿintelligent fixed temperature/rate-of-rise fire detector. It monitors the temperature of the surrounding air and analyzes the data from the sensor to determine whether to initiate an alarm.
Close
Edward SIGA-OSD + SIGA-SB Addressable Smoke Detector with Base
Edward SIGA-OSD + SIGA-SB Addressable Smoke Detector with Base brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
Close
Edward SIGA-OSHD + SIGA-SB Addressable Multi Detector with Base
Edward SIGA-OSHD + SIGA-SB Addressable Multi Detector with Base brings advanced optical sensing technology to a practical design that increases efficiency, saves installation time, cuts costs, and extends life safety and property protection capabilities. Continuous self-diagnostics ensure reliability over the long-haul, while environmental compensation helps reduce maintenance costs.
Close
Edward FW-CGSUL Graphic Software
Edward FW-CGSUL Graphic Software FireWorks is an incident management command and control platform that comprises hardware, software, and networking components that together provide a powerful and cohesive Mass Notification and Life Safety solution.
Close
Edward 3-LCDANN + RLCM Repeater Panel
Edward 3-LCDANN + RLCM Repeater Panel supports a full range of annunciator options for Mass Notification/Emergency Communication (MNEC), Life Safety and other purposes. Annunciator cabinets are constructed from 16 gauge cold rolled steel. The gray textured enamel finish of the annunciators complements any decor.
Close
Edward BACNET FSB-PC2
Edward BACNET FSB-PC2 is a protocol converter that converts the External Communications Protocol (ECP) panel to one of several supported protocols, including Modbus RTU, BACnet MSTP, and Metasys N2. It operates through RS-232 or RS-485 serial communications or Ethernet (10/100 Base-T).
Close
Edward 3-SDDC2 Dual Loop Card
Edward 3-SDDC2 Dual Loop Card Signature Driver Controller modules provide an intelligent interface between the 3-CPU3 module and Signature Series devices. Each module contains its own microprocessor used to coordinate, process and interpret information received from and sent to Signature devices.
Close
Edward EST3-CAB5 4Loop Fire Alarm Panel Expendable upto 4Loop
Edward EST3-CAB5 4Loop Fire Alarm Panel Expendable upto 4Loop is a robust modular control panel that unifies fire alarm, smoke control, security and mass notification systems. The EST3 fire alarm system is a leader in the field with the ability to have network panels with overall length in excess of 300,000 ft. Making the EST3 an ideal solution for any size facility.
