Your list is empty, add products to the list to send a request
Close
Edward EC-100R Beam Detector With Reflector (HSN 85319000)
Edward EC-50R + SIGA-CT1 Analogue Addressable Beam Detector With Reflector comprises a transmitter and receiver in a single enclosure as well as is usually installed between 19 inches and 24 inches below the ceiling. The transmitter emits an invisible infrare light beam that is reflect via a prism mount directly opposite and with a clear line of sight.
Close
TNA Conventional Reflective Beam Detector
EN54-12 Certified. Hassle free alignment, built with digital guide display and laser beam pointing. Employ single-ended design through reflective mirror Four ranges wide monitoring from 8-100 meters via encoder. Three users programming sensitivity adjustment. Built-in microprocessor. Self-diagnosis function can monitor for internal faults Automatic compensation for factors weakening received signals, such as dust contamination, positional movement and ageing of the transmitter. Fire and Fault interfacing relays. Attractive and pleasing appearance. Real User friendly alignment method.
Close
RE-428HR – Beam Detector with (2 No’s) Reflector – 100 mtrs Range.
TheRE-428 Series beam smoke detector is designed for smoke detection at the start of a fire. It is especiallysuitable for
Close
TX7130R Conventional Reflective Beam Detector
TX7130R Conventional Reflective Beam Detector has built in Laser beam pointing and Digital guide display for a real user-friendly alignment method. The Laser beam pointing accurately point the exact location where to mount mirror and with additional digital guide display allows to monitor and guide on the actual light intensity between the mirror and detector which cannot be seen by our naked eye making it more easy and convenient in alignment commissioning.
Close
C-9105R Conventional Reflective Beam Detector
C-9105R Conventional Reflective Beam Detector is an addressable reflective infrared beam smoke detector that can be directly connected to a fire alarm controller, by transmitting status information via a bus between the detector and controller. The detector must be used together with a reflector. The number of reflectors (s) to be used (one or four) depends on the distance from the detector. With a built-in intelligent microprocessor, the detector has a strong ability for analysis and judgment.
Close
Qutak QT BD2606 Beam Detector With 4 reflectors
Beam Detector With 4 reflectors is an optical beam smoke detector is a device that uses a projected beam of light to detect smoke across large areas, typically as an indicator of fire. They are used to detect fires in buildings where standard point smoke detectors would either be uneconomical or restricted for use by the height of the building.
