Your list is empty, add products to the list to send a request
Close
Ravel RE-9024 Conventional Fire Alarm Panel System 24 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single network.
Close
Ravel RE-9020 Conventional Fire Alarm Panel System 20 Zones
Complies with UL -864 and NEPA -72. 20 x 4 dot matrix LCD display. Operates on 120 - 220VAC 60 /50 Hz, AC mains power supply. Standby (battery) backup 24 VDC power supply with built in charger. Touch keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and normal open contact devices. Class B notification appliance circuits (NAC). NAC shall be programmed as AUTO SILENCE / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24VDC. Output. RS 485 Communication facility. TCP/IP facility (Optional) MODBUS for Building Management System integration (Optional). PC software (optional) External zone wise sounder/contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Zones available : 12, 16, 20, 24, 32, 48, 64,96 and 128. Facility to connect Public Address System (PA) through RS-485 Comm Peer to Peer network facility. Maximum 16 panels can be connected to a single
Close
Ravel RE-9012 Conventional Fire Alarm Panel System 12 Zones
The microprocessor based CE mark 12 Zone conventional fire alarm control panel, the system has 20 X 4 LCDcharacter with alpha numeric touch key pad, 12 zones detection circuit, 3 common programmable potential free contacts & 2 common NAC sounder output, inbuilt Rs-485 for Networking TCP/IP, peer to peer & repeater connectivity, central monitoring facility, inbuilt RTC with Event logs, wall/ceiling mounted, Switch mode power supply- SMPS & Battery polarity & Deep discharge protection.
Close
Ravel RE-2558 Conventional Fire Alarm Panel System 8 Zones
Switched Mode Power Supply. Modular Construction Auto Resettable Fuse Surge Protection for all Input and outputs. Programmable AC loss delay/Trouble Remainder/Alarm Verification Battery polarity reversible protection Surface Mount Technology Over All current consumption is low. Fully complies with UL -864 and NFPA-72. Rugged CRCA sheet with powder coated finish Operates on 110 220v 50 /60 Hz, AC Mains power supply. 16×2 Dot Matrix LCD Display. 4/8 Class B Style B or Style C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Any Zone can be configured as Alarm or supervisory Zone. 2ClassBNotificationApplianceCircuits(NAC). NAC shall be programmed as silenceable or Non Silenceable. Supervisory Zone shall be Latching or Resettable. Standby (battery) backup 24v DC power supply with built in charger Error free Fire / Fault status in unambiguous colored LED indication. System ON indication. Main, Standby status audible and visual indication. Battery Low visual warning with audible tone. FormC relays for fire, fault and supervisory. Resettable / Steady 24V D.C. Output. RS 485 Communication facility (Optional). Lamp Test facility. All field wiring circuits are Power limited except 110 220v AC and Battery. All field wiring circuits are supervised. Walk Test facility. Zone Isolation facility with loop voltage cut off. Earth fault annunciation facility at 0 ohms. AC Low voltage cutoff. Programmable AC loss delay / Alarm verification / Trouble reminder.
Close
12 Zone Panel-ravel Make
12 Zone Panel-ravel Make a fire zone is a specific area of a building and each zone is separated by fire walls and fire doors. Sometimes an entire building is a ?single zone,? especially if it's small. Bigger buildings, though, have to be divided up with multiple zones.
Close
8 Zone Panel-ravel Make
8 Zone Panel-ravel Make a fire zone is a specific area of a building and each zone is separated by fire walls and fire doors. Sometimes an entire building is a ?single zone,? especially if it's small. Bigger buildings, though, have to be divided up with multiple zones.
Close
4 Zone Panel-ravel Make
4 Zone Panel-ravel Make a fire zone is a specific area of a building and each zone is separated by fire walls and fire doors. Sometimes an entire building is a ?single zone,? especially if it's small. Bigger buildings, though, have to be divided up with multiple zones.
Close
2 Zone Panel-ravel Make
2 Zone Panel-ravel Make a fire zone is a specific area of a building and each zone is separated by fire walls and fire doors. Sometimes an entire building is a ?single zone,? especially if it's small. Bigger buildings, though, have to be divided up with multiple zones.
Close
24 Zone Panel-agni Make
24 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
22 Zone Panel-agni Make
22 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
20 Zone Panel-agni Make
20 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
18 Zone Panel-agni Make
18 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
16 Zone Panel-agni Make
16 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
14 Zone Panel-agni Make
14 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
12 Zone Panel-agni Make
12 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
8 Zone Panel-agni Make
8 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
6 Zone Panel-agni Make
6 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
4 Zone Panel-agni Make
4 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
2 Zone Panel-agni Make
2 Zone Panel-agni Make Two-wire fire alarm systems work by allowing detectors, call points and alarm devices for each zone to all be wired into the same set of two-core wire.
Close
Detect Fire 4 Zone Panel
Detect Fire 4 Zone Panel Four zonal fire system panels can cover two different areas, making them an attractive choice for smaller/ Bigger buildings. A zone is a group of one or more detectors, collected by their common location or in the form of a collective circuit of all the detectors on that circuit.
