Show sidebar

Ravel RE-9016 Conventional Fire Alarm Panel System 16 Zones

 18,691.20
Complies with UL -864 and NFPA-72. 20 x 4 Dot Matrix LCD Display. Operates on 120 – 220v 60 /50 Hz, AC Mains power supply. Standby (battery) backup 24v DC power supply with builtin charger. Touch Keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Class B Notification Appliance Circuits (NAC). NAC shall be programmed as auto silence / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24V D.C. Output. S 485 Communication facility. TCP/IP facility (Optional) MODBUS for BMS integration (Optional). PC software (optional) External Zone Wise Sounder/Contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Facility to connect Public Address System (PA) through RS-485 Communication. Peer to Peer network facility. Maximum 16 panels can be connect in a Single Network. Electrical Specification
Add to cart

Ravel RE-102R 2 Zone Conventional Fire Alarm Control Panel

 6,195.00
Ravel RE-102R 2 Zone Conventional Fire Alarm Control Panel, which uses conventional input devices. The Outputs include Notification Appliance Circuits
Add to cart

Agni Hunt 4 Zone Fire Alarm Panel- HSN Code 85311020

 3,540.00
Agni 4 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides reliable and cost-effective solutions to fire detection, for small installations which are 4 zones.
Add to cart

ExoFire Fire Alarm Panel – 2 Zone

 3,363.00
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Add to cart

Ravel RE-2558 Conventional Fire Alarm Panel System 8 Zones

 14,986.00
Switched Mode Power Supply. Modular Construction Auto Resettable Fuse Surge Protection for all Input and outputs. Programmable AC loss delay/Trouble Remainder/Alarm Verification Battery polarity reversible protection Surface Mount Technology Over All current consumption is low. Fully complies with UL -864 and NFPA-72. Rugged CRCA sheet with powder coated finish Operates on 110 – 220v 50 /60 Hz, AC Mains power supply. 16×2 Dot Matrix LCD Display. 4/8 Class B Style ‘B ‘ or Style ’C’ initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Any Zone can be configured as Alarm or supervisory Zone. 2ClassBNotificationApplianceCircuits(NAC). NAC shall be programmed as silenceable or Non Silenceable. Supervisory Zone shall be Latching or Resettable. Standby (battery) backup 24v DC power supply with built in charger Error free Fire / Fault status in unambiguous colored LED indication. System ON indication. Main, Standby status audible and visual indication. Battery Low visual warning with audible tone. FormC relays for fire, fault and supervisory. Resettable / Steady 24V D.C. Output. RS 485 Communication facility (Optional). Lamp Test facility. All field wiring circuits are Power limited except 110 – 220v AC and Battery. All field wiring circuits are supervised. Walk Test facility. Zone Isolation facility with loop voltage cut off. Earth fault annunciation facility at 0 ohms. AC Low voltage cutoff. Programmable AC loss delay / Alarm verification / Trouble reminder.
Add to cart

Agni Hunt 2 Zone Fire Alarm Panel

 4,189.00
Agni 2 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost-effective solution to fire detection, for small installations which are 2 zone.
Add to cart

Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel

 8,260.00
Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel, which uses conventional input devices. The Outputs include Notification Appliance Circuits
Add to cart

ExoFire Fire Alarm Panel – 16 Zone

 15,576.00
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Add to cart

ExoFire Fire Alarm Panel – 12 Zone

 13,983.00
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Add to cart

ExoFire Fire Alarm Panel – 10 Zone

 12,213.00
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Add to cart

ExoFire Fire Alarm Panel – 8 Zone

 8,260.00
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Add to cart

ExoFire Fire Alarm Panel – 6 Zone

 6,962.00
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Add to cart

ExoFire Fire Alarm Panel – 4 Zone

 4,189.00
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Add to cart

TrueSafe TSFC-12-2 Two Zone Conventional Fire Alarm Panel with Cloud Connectivity

 4,206.70
TrueSafe TSFC-12-2 12 Volt Two Zone Conventional Fire Alarm Panel with Cloud Connectivity is a state-of-the-art fire alarm solution designed to provide reliable monitoring and management of fire hazards in both residential and commercial environments. This panel allows for independent monitoring of two zones, ensuring organized and efficient fire detection and alerting for different areas of a facility.
Add to cart

TrueSafe TSFC-24-2 Two Zone Conventional Fire Alarm Panel with Cloud Connectivity

 5,133.00
TrueSafe TSFC-24-2 Two Zone Conventional Fire Alarm Panel with Cloud Connectivity is an advanced fire safety solution designed for effective monitoring and management of fire hazards in residential, commercial, and industrial settings. This panel supports two independent zones, enabling precise detection and alerting for different areas of a building.
Add to cart

TrueSafe TSFC-24-4 Four Zone Conventional Fire Alarm Panel with Cloud Connectivity

 7,021.00
TrueSafe TSFC-24-4 Four Zone Conventional Fire Alarm Panel with Cloud Connectivity is an innovative fire alarm control panel designed to bring robust fire detection and notification capabilities to residential, commercial, and industrial environments. This four-zone panel supports a wide range of fire detectors and notification devices, enabling effective, organized monitoring and response for multiple areas.
Add to cart

ASES Thirty two Zone microprocessor based Fire alarm Panel Model No.PR–32Z

 38,291.00
Advance Micro controller basedFire Alarm Panel 10 to 48 zone Expandable 16x2 character LCD Display Mains, A. C. Fail, fuse, Charging,Rev. Batt. Indication Zone wise fire, open, short LED indications Zone wise fire, open, short testing facility Zone healthy indications Zone isolations facility through switch Extra Potential free contact for fire & fault Trickle & fast charging facility Reset ,alarm cancel, Lamp test, controls etc Compatible with any make conventional smoke & heat detector 485 Communication for Repeater & Mimic Panels Common fire, fault annunciation facility.
Add to cart

ASES Twenty Four Zone microprocessor based Fire alarm Panel Model No.PR–24Z

 31,045.80
Advance Micro controller based Fire Alarm Panel. 10 to 48 zone Expandable. 16x2 character LCD Display. Mains, A.C Fail, fuse, Charging, Rev. Batt. Indication. Zone wise fire, open, short LED indications. Zone wise fire, open, short testing facility. Zone healthy indications. Zone isolations facility through switch. Extra Potential free contact for fire & fault. Trickle & fast charging facility. Reset ,alarm cancel, Lamp test, controls etc. Compatible with any make conventional smoke & heat detector.
Add to cart

ASES Twenty Zone microprocessor based Fire alarm Panel Model No.PR–20Z

 27,494.00
Advance Micro controller based Fire Alarm Panel. 10 to 48 zone Expandable. 16x2 character LCD Display. Mains, A.C Fail, fuse, Charging, Rev. Batt. Indication. Zone wise fire, open, short LED indications. Zone wise fire, open, short testing facility. Zone healthy indications. Zone isolations facility through switch. Extra Potential free contact for fire & fault. Trickle & fast charging facility. Reset ,alarm cancel, Lamp test, controls etc. Compatible with any make conventional smoke & heat detector.
Add to cart

ASES Sixteen Zone microprocessor based Fire alarm Panel Model No.PR–16Z

 22,715.00
Menu Based Operations. Expandable upto 72 Zones. 128x64 Graphical Display. 4x4 Matrix Keypad. Inbuilt Real Time Clock. Data Logging upto 500 Events. All Zones and Hooter can be enable/disable through Keypad. Auto Calibration feature. Low and High Voltage alert on Display. Extra potential free contact for Fire & Fault. Trickle & Fast Charging Facility. Compatible with any make Smoke & Heat Detector.
Add to cart