Your list is empty, add products to the list to send a request
Close
Ravel RE-9016 Conventional Fire Alarm Panel System 16 Zones
Complies with UL -864 and NFPA-72. 20 x 4 Dot Matrix LCD Display. Operates on 120 220v 60 /50 Hz, AC Mains power supply. Standby (battery) backup 24v DC power supply with builtin charger. Touch Keypad for user friendly operation. Epoxy powder coated finish. Class- B, Style B / C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Class B Notification Appliance Circuits (NAC). NAC shall be programmed as auto silence / Silence Inhibit. Error free Fire / Fault status in unambiguous colored LED indication. 1000 Event storage with RTC. Main, Standby status with audible and visual indication. Two Form C relays for fire and fault. Resettable / Steady 24V D.C. Output. S 485 Communication facility. TCP/IP facility (Optional) MODBUS for BMS integration (Optional). PC software (optional) External Zone Wise Sounder/Contact via RS 485 (Optional). All field wiring circuits are supervised. Zone Isolation facility with loop voltage cut off. Facility to connect Public Address System (PA) through RS-485 Communication. Peer to Peer network facility. Maximum 16 panels can be connect in a Single Network. Electrical Specification
Close
Ravel RE-102R 2 Zone Conventional Fire Alarm Control Panel
Ravel RE-102R 2 Zone Conventional Fire Alarm Control Panel, which uses conventional input devices. The Outputs include Notification Appliance Circuits
Close
Agni Hunt 4 Zone Fire Alarm Panel- HSN Code 85311020
Agni 4 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides reliable and cost-effective solutions to fire detection, for small installations which are 4 zones.
Close
Simplex 4100-3109 IDNet2 250pt 2 Loop Interface Module
Simplex 4100-3109 IDNet2 250pt 2 Loop Interface Module electrically isolated output with two short circuits isolating Class B or Class
Close
Honeywell Farenhyt – Repeater Panel Model: RA-2000
RA-2000 remote annunciators are used to operate and program Silent Knight® Farenhyt™ Series fire alarm control panels (FACPs). They connect
Close
Honeywell Farenhyt- IFP-2100 Fire Alarm Control Panel – 4 Loop
Honeywell’s Farenhyt series Analog Addressable Fire Alarm Control Panels are the controlling unit of a fire alarm system with an
Close
ExoFire Fire Alarm Panel – 2 Zone
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Close
Ravel RE-2558 Conventional Fire Alarm Panel System 8 Zones
Switched Mode Power Supply. Modular Construction Auto Resettable Fuse Surge Protection for all Input and outputs. Programmable AC loss delay/Trouble Remainder/Alarm Verification Battery polarity reversible protection Surface Mount Technology Over All current consumption is low. Fully complies with UL -864 and NFPA-72. Rugged CRCA sheet with powder coated finish Operates on 110 220v 50 /60 Hz, AC Mains power supply. 16×2 Dot Matrix LCD Display. 4/8 Class B Style B or Style C initiating device circuit (IDC). All zones accept smoke detectors and any normally open contact device. Any Zone can be configured as Alarm or supervisory Zone. 2ClassBNotificationApplianceCircuits(NAC). NAC shall be programmed as silenceable or Non Silenceable. Supervisory Zone shall be Latching or Resettable. Standby (battery) backup 24v DC power supply with built in charger Error free Fire / Fault status in unambiguous colored LED indication. System ON indication. Main, Standby status audible and visual indication. Battery Low visual warning with audible tone. FormC relays for fire, fault and supervisory. Resettable / Steady 24V D.C. Output. RS 485 Communication facility (Optional). Lamp Test facility. All field wiring circuits are Power limited except 110 220v AC and Battery. All field wiring circuits are supervised. Walk Test facility. Zone Isolation facility with loop voltage cut off. Earth fault annunciation facility at 0 ohms. AC Low voltage cutoff. Programmable AC loss delay / Alarm verification / Trouble reminder.
Close
Agni Hunt 2 Zone Fire Alarm Panel
Agni 2 Zone Fire Alarm Panel of Microprocessor based fire alarm panels provides a reliable and cost-effective solution to fire detection, for small installations which are 2 zone.
Close
Ravel 4 Zone Fire Alarm Panel
Ravel 4 Zone Fire Alarm Panel microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted.
Ravel 2 Zone Fire Alarm Panel
Ravel 2 Zone Fire Alarm Panel microprocessor based 2 Zone CE mark conventional fire alarm control panel is a standalone system, with 16 X 2 LCDcharacter, 2 zones detection circuit,3 common potential free contacts & a common NAC sounder output, wall/ceiling mounted.
Close
Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel
Ravel RE-104R 4 Zone Conventional Fire Alarm Control Panel, which uses conventional input devices. The Outputs include Notification Appliance Circuits
Close
TNA – LCD Repeater Panel – Model: TX7330
The TNA TX7330 LCD Repeater Panel is a high-performance addressable display unit designed to replicate real-time fire system information from the main control panel to remote locations. Featuring a bright, backlit LCD display and intuitive navigation keys, the TX7330 provides quick access to alarm status, faults, and system events — making it an ideal choice for large or multi-zone buildings requiring additional monitoring points.
Close
Honeywell – Fire Alarm Control Panel – Model: DXC4
Ensure maximum fire safety in commercial or industrial buildings with the Honeywell DXC4 Fire Alarm Control Panel. Designed for reliability and ease of installation, the DXC4 is a robust, fully-featured conventional fire alarm panel supporting up to four detection zones. With intuitive controls, clear LED indicators, and compatibility with a wide range of conventional detection devices, it provides dependable fire protection in small to medium-sized premises.
Close
Royale or Innovative Conventional 150 zones fire alarm panel
The Automatic fire detection and alarm system is designed to serve the purpose of fire detection at the earliest practicable
Close
PANEL | CONTROL | INCLUSIVE OF SAFETY SWITCHES | ISOLATOR AND LPB PANEL | SIREN AND STROBE LIGHT ARRANGEMENTS | FOR CONVEYOR SYSTEM
It combines essential components such as safety switches, an isolator, a Local Push Button (LPB) panel, and siren and strobe
Close
Notifier ISO/X Fault Isolator Module
Notifier ISO/X Isolator Module is designed to protect intelligent fire alarm system SLC (Signaling Line Circuit) loops from short circuits.
Close
Silent Knight IDP-ISO Addressable Isolator Module
Silent Knight IDP-ISO Addressable Isolator Module is designed to protect a fire alarm system by isolating short circuits on an
Close
ExoFire Fire Alarm Panel – 16 Zone
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
Close
ExoFire Fire Alarm Panel – 12 Zone
Fire Detection. Control and Reset Functions. Fault Detection and Reporting. Audible Alarms. LED Indicators. User Friendly.
